english
 
drsolar
iva included

01_3_a Victron Inverters

Dr.Solar
Tel/Fax: 956 640 230
Mobile: 630 200 705
Email: sales@drsolar.es

Opening Hours
Mon to Fri: 09:00 to 20:00
Saturday: 10:00 to 12:00

VICTRON PHOENIX OFF-GRID INVERTERS AND ACCESSORIES


Victron pure sine wave inverters are the most advanced available on the market. They are ideally suited for use with many off grid (stand alone) applications including:

  • Solar and wind power systems
  • Emergency power supply systems
  • Remote areas where there is no continuous AC supply
  • Industrial and professional power systems
  • Yachts and commercial vessels and the marine environment in general
  • Caravans, ambulances, service vans, broadcasting vehicles and trains

Superior Engineering - SinusMax

A true pure sine wave inverter with optimised efficiency without a compromise in performance. Employing hybrid HF technology resulting in a light, compact unit that is capable of supplying problem free power to virtually any load.

Extra-start up power

A unique feature of the SinusMax technology is very high start-up power.  Phoenix inverters are well suited to start difficult loads such as compressors, refrigerators, electric motors and refrigerators. 

Unlimited Power

Up to six (6) Phoenix 24V-3000W inverters can be connected in parallel to achieve 18KVA.  Operation in 3-phase configuration can also be achieved.

Auto Load Transfer

For inverters rated up to 1200 VA the Filax Automatic Transfer switch can be utilised.  For inverters rated at 1200 VA or more then it is recommended that a Phoenix Mulitplus is used instead as the switch is included in these products. Both Filax and the Pheonix Multi feature a very short (less than 20 milliseconds switchover)

Computer Interface

All models rated at 1200 VA or more have a RS-485 computer interface.  Together with the VEConfigure software, all parameters of the inverters can be customised.  The inverters can alos be connected to VENet, Victron Energy's new power control network.

ADDITIONAL FEATURES

 

Extra start-up power

A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances.

Virtually unlimited power thanks to parallel and 3-phase operation capability

Up to 6 units Phoenix 24/3000 can operate in parallel to achieve higher power output. Six 24/3000 units, for example, will provide 15 kW / 18 kVA output power. Operation in 3-phase configuration is also possible. (Please request VE.Bus enabled units for best 3 phase performance)

To transfer the load to another AC source: the automatic transfer switch

If an automatic transfer switch is required on models rated at 800 VA or more, we recommend to using the Phoenix Multi instead. The switch is included in these products and the charger function of the Multi can be disabled. For our lower power models we recommend the use of our Filax Automatic Transfer Switch. Computers and other electronic equipment will continue to operate without disruption because both the Filax and the Phoenix Multi feature a very short switchover time (less than 20 milliseconds).

Computer interface

All models rated at 1200 VA or more have a RS-485 computer interface. All you need to connect to your PC is our data link MK2 (see under accessories). This data link takes care of galvanic isolation between the inverter and the computer, and converts from RS-485 to RS-232. Together with the VEConfigure software, which can be downloaded free of charge from our website www.victronenergy.com, all parameters of the inverters can be customised. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator.

The inverters can also be connected to VENet, the new power control network of Victron Energy, or to other computerised monitoring and control systems.

New applications of high power inverters

The possibilities of paralleled high power inverters are truly amazing. For ideas, examples and battery capacity calculations please refer to their book “Electricity on board” available free of charge from Victron Energy and downloadable from www.victronenergy.com


 
MODEL SPECIFICATIONES PRICE WITH IVA MANUAL
INVERSORES 12V PHOENIX    
       PHEONIX MANUALS
Victron Phoenix 12V 750VA 230V 440 Euros  
Victron Phoenix 12V 1200VA 230V 875Euros  
Victron Phoenix 12V 1600VA 230V 1190Euros  
Victron Phoenix 12V 2000VA 230V 1455 Euros  
Victron Phoenix 12V 3000VA 230V 1695 Euros  
     
INVERTERS 24V PHOENIX  
     
Victron Phoenix 24V 750VA 230V 440 Euros  
VictronPhoenix 24V 1200VA 230V 875Euros  
VictronPhoenix 24V 1600VA 230V 1190 Euros  
VictronPhoenix 24V 2000VA 230V 1455 Euros  
VictronPhoenix 24V 3000VA 230V 1695 Euros  
VictronPhoenix 24V 5000VA 230V 2750 Euros  
       
INVERSORES 48V PHEONIX    
       
Victron Pheonix 48V 750VA 230V 440 Euros  
Victron Pheonix 48V 3000VA 230V 1695 Euros  
Victron Pheonix 48V 5000VA 230V 2750 Euros  
       
IINVERSORES/CARGADORES 12V MULTIPLUS    
Multiplus C 12 V 1200W